A gas burner that clicks but will not light almost always has an igniter or spark-module fault, or debris and moisture around the burner. It is a common and usually quick fix on Wolf, Viking, and Thermador ranges.
Notes by Brand
The same symptom can point to different parts depending on the brand. Here is how burner not igniting typically shows up across the luxury roster we service in Sandy Springs:
Wolf
A Wolf burner that clicks without lighting usually has a wet or fouled igniter or a failed spark module.
Viking
Viking burners fail to light most often from a fouled igniter or a clogged burner port.
Thermador
Thermador star burners are slow to light when the igniter is dirty or the spark module is weak.
La Cornue
A La Cornue burner that will not light usually has an igniter or gas-valve fault.
Dacor
Dacor burners report some faults as codes; a clicking burner usually means the igniter or module.
Monogram
GE-platform burners fail to ignite from a fouled igniter or a spark-module fault.
Jenn-Air
Whirlpool-family burners click without lighting when the igniter or switch fails.
Symptom and Fault Reference
A quick reference for the ways this problem appears and what we do about each:
| Symptom / Code | Likely Cause | What We Do |
|---|---|---|
| Clicks but no flame | Igniter fouled or module failed | Clean the igniter, replace the spark module |
| No click at all | Spark switch or wiring fault | Test the switch and wiring to the igniter |
| Weak or yellow flame | Clogged port or gas pressure | Clear the burner port, verify gas pressure |
| One burner out | Igniter or valve for that burner | Test that burner's igniter and valve |
A Quick Safety Note
If you smell gas, see water near an electrical outlet, or notice a burning smell, turn off the appliance and, where relevant, its gas or water supply before booking service. When in doubt, call us and we will advise.
Book a Diagnostic Visit
Describe what is happening and we will bring the likely parts. Written estimate before any work, fees confirmed before approval.
Frequently Asked Questions
Why Does My Burner Click but Not Light?
A clicking burner that will not light usually has a wet or fouled igniter, or a failed spark module. We clean and dry the igniter and replace the module when the spark is weak or missing.
Is It Safe to Keep Trying to Light a Burner?
If you smell gas, stop and ventilate the room, then book service. A burner that clicks briefly without lighting and releases no strong gas odor is fine to leave off until we arrive.
Can Moisture Stop a Burner from Lighting?
Yes. Spills and cleaning water around the igniter are a frequent cause. Drying the burner assembly often restores ignition, and we test the igniter to confirm.
Related Problems
Refrigerator Not Cooling
A refrigerator that will not hold temperature is the most common call we get in.
Ice Maker Not Working
An ice maker that stops usually has a water-path problem: a frozen fill tube, a.
Water Leaking
Water on the floor comes from a handful of places: a dishwasher door seal or pum.
Strange Noises
New noises from a refrigerator, range, or dishwasher usually point to a fan, mot.